Anisotropy and isotope effect in superconducting solid hydrogen.

Elucidating the phase diagram of solid hydrogen is a key objective in condensed matter physics. Several decades ago, it was proposed that at low temperatures and high pressures, solid hydrogen would be a metal with a high superconducting transition temperature. This transition to a metallic state can happen through the closing of the energy gap in the molecular solid or through a transition to an atomic solid. Recent experiments have managed to reach pressures in the range of 400-500 GPa, providing valuable insights. There is strong evidence suggesting that metallization via either of these mechanisms occurs within this pressure range. Computational and experimental studies have identified multiple promising crystal phases, but the limited accuracy of calculations and the limited capabilities of experiments prevent us from determining unequivocally the observed phase or phases. Therefore, it is crucial to investigate the superconducting properties of all the candidate phases. Recently, we reported the superconducting properties of theC2/c-24,Cmca-12,Cmca-4 andI41/amd-2 phases, including anharmonic effects. Here, we report the effects of anisotropy on superconducting properties using Eliashberg theory. Then, we investigate the superconducting properties of deuterium and estimate the size of the isotope effect for each phase. We find that the isotope effect on superconductivity is diminished by anharmonicity in theC2/c-24 andCmca-12 phases and enlarged in theCmca-4 andI41/amd-2 phases. Our anharmonic calculations of theC2/c-24 phase of deuterium agree closely with the most recent experiment by Loubeyreet al(2022Phys. Rev. Lett.29035501), indicating that theC2/c-24 phase remains the leading candidate in this pressure range, and has a strong anharmonic character. These characteristics can serve to distinguish among crystal phases in experiment. Furthermore, expanding our understanding of superconductivity in pure hydrogen holds significance in the study of high-Tchydrides.

1D Magnetic MX3 Single-Chains (M = Cr, V and X = Cl, Br, I).

Magnetic materials in reduced dimensions are not only excellent platforms for fundamental studies of magnetism, but they play crucial roles in technological advances. The discovery of intrinsic magnetism in monolayer 2D van der Waals systems has sparked enormous interest, but the single-chain limit of 1D magnetic van der Waals materials has been largely unexplored. This paper reports on a family of 1D magnetic van der Waals materials with composition MX3 (M = Cr, V, and X = Cl, Br, I), prepared in fully-isolated fashion within the protective cores of carbon nanotubes. Atomic-resolution scanning transmission electron microscopy identifies unique structures that differ from the well-known 2D honeycomb lattice MX3 structure. Density functional theory calculations reveal charge-driven reversible magnetic phase transitions.

Tuning the Sharing Modes and Composition in a Tetrahedral GeX2 (X = S, Se) System via One-Dimensional Confinement.

The packing and connectivity of tetrahedral units are central themes in the structural and electronic properties of a host of solids. Here, we report one-dimensional (1D) chains of GeX2 (X = S or Se) with modification of the tetrahedral connectivity at the single-chain limit. Precise tuning of the edge- and corner-sharing modes between GeX2 blocks is achieved by diameter-dependent 1D confinement inside a carbon nanotube. Atomic-resolution scanning transmission electron microscopy directly confirms the existence of two distinct types of GeX2 chains. Density functional theory calculations corroborate the diameter-dependent stability of the system and reveal an intriguing electronic structure that sensitively depends on tetrahedral connectivity and composition. GeS2(1-x)Se2x compound chains are also realized, which demonstrate the tunability of the system's semiconducting properties through composition engineering.

Resonantly Enhanced Electromigration Forces for Adsorbates on Graphene.

We investigate the electromigration forces for weakly bonded adsorbates on graphene by using density-functional based calculations. We find that the nature of electromigration forces on an adsorbate critically depends on the energy level alignment between the adsorbate state and the Fermi level of the graphene. For a resonant adsorbate, whose frontier orbitals lie close to the Fermi level, the electromigration force is dominated by the electron wind force that is strongly enhanced along the electron flow direction, irrespective of the sign of the adsorbate charge. For a nonresonant adsorbate, the electromigration force is essentially the direct force that depends on the adsorbate charge. We also show that the magnitude of electromigration forces can be continuously tunable through electrostatic gating for resonant adsorbates. Our results provide new insight for understanding and controlling how nanoscale objects behave in or on host materials.

Magnetism and interlayer bonding in pores of Bernal-stacked hexagonal boron nitride.

When single-layer h-BN is subjected to a high-energy electron beam, triangular pores with nitrogen edges are formed. Because of the broken sp2 bonds, these pores are known to possess magnetic states. We report on the magnetism and electronic structure of triangular pores as a function of their size. Moreover, in the Bernal-stacked h-BN (AB-h-BN), multilayer pores with parallel edges can be created, which is not possible in the commonly fabricated multilayer AA'-h-BN. Given that these pores can be manufactured in a well-controlled fashion using an electron beam, it is important to understand the interactions of pores in neighboring layers. We find that in certain configurations, the edges of the neighboring pores remain open and retain their magnetism, and in others, they form interlayer bonds. We present a comprehensive report on these configurations for small nanopores. We find that at low temperatures, these pores have near degenerate magnetic configurations, and may be utilized in magnetoresistance and spintronics applications. In the process of forming larger multilayer nanopores, interlayer bonds can form, reducing the magnetization. Yet, unbonded parallel multilayer edges remain available at all sizes. Understanding these pores is also helpful in a multitude of applications such as DNA sequencing and quantum emission.

Targeting One- and Two-Dimensional Ta-Te Structures via Nanotube Encapsulation.

Fine control over material synthesis on the nanoscale can facilitate the stabilization of competing crystalline structures. Here, we demonstrate how carbon nanotube reaction vessels can be used to selectively create one-dimensional TaTe3 chains or two-dimensional TaTe2 nanoribbons with exquisite control of the chain number or nanoribbon thickness and width. Transmission electron microscopy and scanning transmission electron microscopy reveal the detailed atomic structure of the encapsulated materials. Complex superstructures such as multichain spiraling and apparent multilayer moirés are observed. The rare 2H phase of TaTe2 (1H in monolayer) is found to be abundant as an encapsulated nanoribbon inside carbon nanotubes. The experimental results are complemented by density functional theory calculations for the atomic and electronic structure, which uncovers the prevalence of 2H-TaTe2 due to nanotube-to-nanoribbon charge transfer and size confinement. Calculations also reveal new 1T' type charge density wave phases in TaTe2 that could be observed in experimental studies.

High temperature superconductivity in the candidate phases of solid hydrogen.

As the simplest element in nature, unraveling the phase diagram of hydrogen is a primary task for condensed matter physics. As conjectured many decades ago, in the low-temperature and high-pressure part of the phase diagram, solid hydrogen is expected to become metallic with a high superconducting transition temperature. The metallization may occur via band gap closure in the molecular solid or via a transition to the atomic solid. Recently, a few experimental studies pushed the achievable pressures into the 400-500 GPa range. There are strong indications that at some pressure in this range metallization via either of these mechanisms occurs, although there are disagreements between experimental reports. Furthermore, there are multiple good candidate crystal phases that have emerged from recent computational and experimental studies which may be realized in upcoming experiments. Therefore, it is crucial to determine the superconducting properties of these candidate phases. In a recent study, we reported the superconducting properties of theC2/c-24 phase, which we believe to be a strong candidate for metallization via band gap closure (Doganet al2022Phys. Rev. B105L020509). Here, we report the superconducting properties of theCmca-12,Cmca-4 andI41/amd-2 phases including the anharmonic effects using a Wannier function-based densek-point andq-point sampling. We find that theCmca-12 phase has a superconducting transition temperature that rises from 86 K at 400 GPa to 212 K at 500 GPa, whereas theCmca-4 andI41/amd-2 phases show a less pressure-dependent behavior with theirTcin the 74-94 K and 307-343 K ranges, respectively. These properties can be used to distinguish between crystal phases in future experiments. Understanding superconductivity in pure hydrogen is also important in the study of high-Tchydrides.

Nonstoichiometric Salt Intercalation as a Means to Stabilize Alkali Doping of 2D Materials.

Although doping with alkali atoms is a powerful technique for introducing charge carriers into physical systems, the resulting charge-transfer systems are generally not air stable. Here we describe computationally a strategy towards increasing the stability of alkali-doped materials that employs stoichiometrically unbalanced salt crystals with excess cations (which could be deposited during, e.g., in situ gating) to achieve doping levels similar to those attained by pure alkali metal doping. The crystalline interior of the salt crystal acts as a template to stabilize the excess dopant atoms against oxidation and deintercalation, which otherwise would be highly favorable. We characterize this doping method for graphene, NbSe_{2}, and Bi_{2}Se_{3} and its effect on direct-to-indirect band gap transitions, 2D superconductivity, and thermoelectric performance. Salt intercalation should be generally applicable to systems which can accommodate this "ionic crystal" doping (and particularly favorable when geometrical packing constraints favor nonstoichiometry).

Experimental and Theoretical Study of Possible Collective Electronic States in Exfoliable Re-Doped NbS2.

Metallic transition-metal dichalcogenides (TMDs) are rich material systems in which the interplay between strong electron-electron and electron-phonon interactions often results in a variety of collective electronic states, such as charge density waves (CDWs) and superconductivity. While most metallic group V TMDs exhibit coexisting superconducting and CDW phases, 2H-NbS2 stands out with no charge ordering. Further, due to strong interlayer interaction, the preparation of ultrathin samples of 2H-NbS2 has been challenging, limiting the exploration of presumably rich quantum phenomena in reduced dimensionality. Here, we demonstrate experimentally and theoretically that light substitutional doping of NbS2 with heavy atoms is an effective approach to modify both interlayer interaction and collective electronic states in NbS2. Very low concentrations of Re dopants (<1%) make NbS2 exfoliable (down to monolayer) while maintaining its 2H crystal structure and superconducting behavior. In addition, first-principles calculations suggest that Re dopants can stabilize some native CDW patterns that are not stable in pristine NbS2.

Ultranarrow TaS2 Nanoribbons.

Imposing additional confinement in two-dimensional (2D) materials yields further control over their electronic, optical, and topological properties. However, synthesis of ultranarrow nanoribbons (NRs) remains challenging, particularly for transition metal dichalcogenides (TMDs), and synthesizing TMD NRs narrower than 50 nm has remained elusive. Here, we report the vapor-phase synthesis of ultranarrow TaS2 NRs. The NRs are grown within carbon nanotubes, limiting their width and layer number, while stabilizing them against the environment. The NRs reach monolayer thickness and exhibit widths down to 2.5 nm. Atomic-resolution scanning transmission electron microscopy reveals the detailed atomic structure of the ultranarrow NRs and we observe a hitherto unseen atomic structure supermodulation of ordered defect arrays within the NRs. Density functional theory calculations show the presence of flat bands and boundary-localized states, and help identify the atomic configuration of the supermodulation. Nanotube-templated synthesis represents a unique, transferable, and broadly deployable route toward ultranarrow TMD NR growth.

Stabilization of NbTe3, VTe3, and TiTe3 via Nanotube Encapsulation.

The structure of MX3 transition metal trichalcogenides (TMTs, with M a transition metal and X a chalcogen) is typified by one-dimensional (1D) chains weakly bound together via van der Waals interactions. This structural motif is common across a range of M and X atoms (e.g., NbSe3, HfTe3,TaS3), but not all M and X combinations are stable. We report here that three new members of the MX3 family which are not stable in bulk, specifically NbTe3, VTe3, and TiTe3, can be synthesized in the few- (2-4) to single-chain limit via nanoconfined growth within the stabilizing cavity of multiwalled carbon nanotubes. Transmission electron microscopy (TEM) and atomic-resolution scanning transmission electron microscopy (STEM) reveal the chain-like nature and the detailed atomic structure. The synthesized materials exhibit behavior unique to few-chain quasi-1D structures, such as few-chain spiraling and a trigonal antiprismatic rocking distortion in the single-chain limit. Density functional theory (DFT) calculations provide insight into the crystal structure and stability of the materials, as well as their electronic structure.

Observed metallization of hydrogen interpreted as a band structure effect.

A recent experimental study of the metallization of hydrogen tracked the direct band gap and vibron frequency via infrared measurements up to ∼425 GPa (Loubeyreet al(2020Nature577631). Above this pressure, the direct gap has a discontinuous drop to below the minimum experimentally accessible energy (∼0.1 eV). The authors suggested that this observation is caused by a structural phase transition between theC2/c-24 molecular phase to another molecular phase such asCmca-12. Here, throughab initiocalculations of pressure dependent vibron frequency and direct band gap, we find that the experimental data is consistent with theC2/c-24 phase up to 425 GPa, and suggest that this consistency extends beyond that pressure. Specifically, we find that qualitative changes in the band structure of theC2/c-24 phase lead to a discontinuous drop of the direct band gap, which can explain the observed drop without a structural transition. This alternative scenario, which naturally explains the absence of hysteresis in the measurements, will hopefully motivate further experimental studies to ascertain the structure of the phase above the high pressure 'phase transition'.

High-Performance Atomically-Thin Room-Temperature NO2 Sensor.

The development of room-temperature sensing devices for detecting small concentrations of molecular species is imperative for a wide range of low-power sensor applications. We demonstrate a room-temperature, highly sensitive, selective, stable, and reversible chemical sensor based on a monolayer of the transition-metal dichalcogenide Re0.5Nb0.5S2. The sensing device exhibits a thickness-dependent carrier type, and upon exposure to NO2 molecules, its electrical resistance considerably increases or decreases depending on the layer number. The sensor is selective to NO2 with only minimal response to other gases such as NH3, CH2O, and CO2. In the presence of humidity, not only are the sensing properties not deteriorated but also the monolayer sensor shows complete reversibility with fast recovery at room temperature. We present a theoretical analysis of the sensing platform and identify the atomically sensitive transduction mechanism.

Emergence of Topologically Nontrivial Spin-Polarized States in a Segmented Linear Chain.

The synthesis of new materials with novel or useful properties is one of the most important drivers in the fields of condensed matter physics and materials science. Discoveries of this kind are especially significant when they point to promising future basic research and applications. van der Waals bonded materials comprised of lower-dimensional building blocks have been shown to exhibit emergent properties when isolated in an atomically thin form [1-8]. Here, we report the discovery of a transition metal chalcogenide in a heretofore unknown segmented linear chain form, where basic building blocks each consisting of two hafnium atoms and nine tellurium atoms (Hf_{2}Te_{9}) are van der Waals bonded end to end. First-principle calculations based on density functional theory reveal striking crystal-symmetry-related features in the electronic structure of the segmented chain, including giant spin splitting and nontrivial topological phases of selected energy band states. Atomic-resolution scanning transmission electron microscopy reveals single segmented Hf_{2}Te_{9} chains isolated within the hollow cores of carbon nanotubes, with a structure consistent with theoretical predictions. van der Waals bonded segmented linear chain transition metal chalcogenide materials could open up new opportunities in low-dimensional, gate-tunable, magnetic, and topological crystalline systems.

Frustration and Atomic Ordering in a Monolayer Semiconductor Alloy.

Frustrated interactions can lead to short-range ordering arising from incompatible interactions of fundamental physical quantities with the underlying lattice. The simplest example is the triangular lattice of spins with antiferromagnetic interactions, where the nearest-neighbor spin-spin interactions cannot simultaneously be energy minimized. Here we show that engineering frustrated interactions is a possible route for controlling structural and electronic phenomena in semiconductor alloys. Using aberration-corrected scanning transmission electron microscopy in conjunction with density functional theory calculations, we demonstrate atomic ordering in a two-dimensional semiconductor alloy as a result of the competition between geometrical constraints and nearest-neighbor interactions. Statistical analyses uncover the presence of short-range ordering in the lattice. In addition, we show how the induced ordering can be used as another degree of freedom to considerably modify the band gap of monolayer semiconductor alloys.

Simulating the Nanomechanical Response of Cyclooctatetraene Molecules on a Graphene Device.

We investigate the atomic and electronic structures of cyclooctatetraene (COT) molecules on graphene and analyze their dependence on external gate voltage using first-principles calculations. The external gate voltage is simulated by adding or removing electrons using density functional theory calculations. This allows us to investigate how changes in carrier density modify the molecular shape, orientation, adsorption site, diffusion barrier, and diffusion path. For increased hole doping, COT molecules gradually change their shape to a more flattened conformation and the distance between the molecules and graphene increases while the diffusion barrier drastically decreases. For increased electron doping, an abrupt transition to a planar conformation at a carrier density of -8 × 1013 e/cm2 is observed. These calculations imply that the shape and mobility of adsorbed COT molecules can be controlled by externally gating graphene devices.

Torsional instability in the single-chain limit of a transition metal trichalcogenide.

The scientific bounty resulting from the successful isolation of few to single layers of two-dimensional materials suggests that related new physics resides in the few- to single-chain limit of one-dimensional materials. We report the synthesis of the quasi-one-dimensional transition metal trichalcogenide NbSe3 (niobium triselenide) in the few-chain limit, including the realization of isolated single chains. The chains are encapsulated in protective boron nitride or carbon nanotube sheaths to prevent oxidation and to facilitate characterization. Transmission electron microscopy reveals static and dynamic structural torsional waves not found in bulk NbSe3 crystals. Electronic structure calculations indicate that charge transfer drives the torsional wave instability. Very little covalent bonding is found between the chains and the nanotube sheath, leading to relatively unhindered longitudinal and torsional dynamics for the encapsulated chains.

Electrostatically Driven Nanoballoon Actuator.

We demonstrate an inflatable nanoballoon actuator based on geometrical transitions between the inflated (cylindrical) and collapsed (flattened) forms of a carbon nanotube. In situ transmission electron microscopy experiments employing a nanoelectromechanical manipulator show that a collapsed carbon nanotube can be reinflated by electrically charging the nanotube, thus realizing an electrostatically driven nanoballoon actuator. We find that the tube actuator can be reliably cycled with only modest control voltages (few volts) with no apparent wear or fatigue. A complementary theoretical analysis identifies critical parameters for nanotube nanoballoon actuation.

Inhibiting Klein Tunneling in a Graphene p-n Junction without an External Magnetic Field.

We study by first-principles calculations a densely packed island of organic molecules (F_{4}TCNQ) adsorbed on graphene. We find that with electron doping the island naturally forms a p-n junction in the graphene sheet. For example, a doping level of ∼3×10^{13} electrons per cm^{2} results in a p-n junction with an 800 meV electrostatic potential barrier. Unlike in a conventional p-n junction in graphene, in the case of the junction formed by an adsorbed organic molecular island we expect that the Klein tunneling is inhibited, even without an applied external magnetic field. Here Klein tunneling is inhibited by the ferromagnetic order that spontaneously occurs in the molecular island upon doping. We estimate that the magnetic barrier in the graphene sheet is around 10 mT.

Towards three-dimensional Weyl-surface semimetals in graphene networks.

Graphene as a two-dimensional topological semimetal has attracted much attention for its outstanding properties. In contrast, three-dimensional (3D) topological semimetals of carbon are still rare. Searching for such materials with salient physics has become a new direction in carbon research. Here, using first-principles calculations and tight-binding modeling, we propose a new class of Weyl semimetals based on three types of 3D graphene networks. In the band structures of these materials, two flat Weyl surfaces appear in the Brillouin zone, which straddle the Fermi level and are robust against external strain. Their unique atomic and electronic structures enable applications in correlated electronics, as well as in energy storage, molecular sieves, and catalysis. When the networks are cut, the resulting slabs and nanowires remain semimetallic with Weyl lines and points at the Fermi surfaces, respectively. Between the Weyl lines, flat surface bands emerge with possible strong magnetism. The robustness of these structures can be traced back to a bulk topological invariant, ensured by the sublattice symmetry, and to the one-dimensional Weyl semimetal behavior of the zigzag carbon chain.